Master
English
Engineering
Transfers-Fluids-Materials in Aeronautical and Space Applications (TFM-ASA)
Master
About the Program
The international Master's programme "Transfers-Fluids-Materials in Aeronautical and Space Applications" combines studies and research based on aerodynamics, thermodynamics, compressible flows, turbulence, propulsion, combustion, turbomachinery, and material science, just to name a few. These themes are all directly connected with technical and fundamental studies as well as with aircraft, spacecraft, and drone issues, etc. One of the major programme objectives is to create a synergy between the industrial and academic international research centres. The programme is jointly managed by three academic European partners: University of Bordeaux (France), Université catholique de Louvain (Belgium), and Brandenburg University of Technology Cottbus-Senftenberg (Germany) on the base of an attractive student mobility scheme. For further information, please visit www.tfmasa.eu and www.b-tu.de/en/transfersfluidsmaterials-ms.
General Requirements
Specific requirements for this program are not in our database yet. The following are typical for this degree and language in Germany — always verify the exact requirements on the program's official page.
Academic qualification
A recognised Bachelor's degree in a related field; some programs require a minimum grade or specific prerequisites.
Language
English proficiency (typically IELTS ~6.5 or TOEFL iBT ~90). Basic German is helpful for daily life.
Typical documents
- Recognised diploma and transcript (certified translations)
- Language certificate
- Passport and passport photo
- Tabular CV (Lebenslauf)
- Letter of motivation (for many programs)
- Application via uni-assist / VPD (for most international applicants)
Which Professions Does This Program Open Up?
Related profession searches from Bundesagentur für Arbeit (BERUFENET) data:
Explore all professions →Subjects / Topic Areas
Aeronautical Engineering
Similar Programs
Mechatronik
Technische Universität Darmstadt
Master of Science (M.Sc.)
Energie- und Verfahrenstechnik
Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau
Master of Science (M.Sc.)
Mechanical Engineering
Leibniz Universität Hannover
Master of Science (M.Sc.)
Civil Engineering – Structural Engineering Track
Leibniz Universität Hannover
Master of Science (M.Sc.)
Workspace Management and Real Estate Engineering
Berliner Hochschule für Technik
Master of Science (M.Sc.)
Energy Management and Energy Engineering
Technische Hochschule Nürnberg Georg Simon Ohm
Master of Engineering (M.Eng.)
How do I apply to Transfers-Fluids-Materials in Aeronautical and Space Applications (TFM-ASA) at Brandenburg University of Technology Cottbus-Senftenberg?
Most international applicants apply via uni-assist (document verification + APS for some countries). Prepare your secondary/Bachelor diploma, transcripts, language certificate (DSH/TestDaF or IELTS/TOEFL), motivation letter and CV. Non-EU students also need a Sperrkonto (~11,904 EUR/year) for the visa.
- Check requirements — Verify your degree is recognised + meet language/grade thresholds.
- Get language certificate — TestDaF / DSH for German programmes, IELTS / TOEFL for English.
- Submit via uni-assist (non-EU) — Document review + APS if your country requires it (China, India, Pakistan, Vietnam, etc.).
- Apply directly or via uni portal — Some universities accept direct applications — check the official programme page.
- Open Sperrkonto + apply for visa — After admission, deposit 11,904 EUR, get health insurance, book embassy appointment.
Frequently Asked Questions
Quick answers about Transfers-Fluids-Materials in Aeronautical and Space Applications (TFM-ASA) at Brandenburg University of Technology Cottbus-Senftenberg
Is Transfers-Fluids-Materials in Aeronautical and Space Applications (TFM-ASA) at Brandenburg University of Technology Cottbus-Senftenberg taught in German or English? ▼
This Master programme is taught in English. Make sure to check the language requirements (e.g. TestDaF, DSH, IELTS or TOEFL) before applying.
How much does the Transfers-Fluids-Materials in Aeronautical and Space Applications (TFM-ASA) programme cost? ▼
No tuition fee (only semester contribution). International students should also budget around 800–1000 EUR/month for living costs in Germany.
What are the admission requirements for Transfers-Fluids-Materials in Aeronautical and Space Applications (TFM-ASA) at Brandenburg University of Technology Cottbus-Senftenberg? ▼
Typical requirements include: a recognised secondary/undergraduate degree, proof of language proficiency (English), and (for non-EU applicants) a uni-assist application plus financial proof (Sperrkonto ~11.904 EUR/year).
When is the application deadline? ▼
Application deadlines vary: winter semester usually closes on 15 July, summer semester on 15 January. Always confirm the exact deadline on the official university website.
Can I work in Germany while studying Transfers-Fluids-Materials in Aeronautical and Space Applications (TFM-ASA)? ▼
Yes. International students may work up to 140 working days a year without additional permission (a day of up to 4 hours counts as half a day). After graduation you can apply for an 18-month job-seeker permit.
How do I apply to Brandenburg University of Technology Cottbus-Senftenberg — directly or via uni-assist? ▼
Most German universities accept international applications through uni-assist for document verification. Some unis accept direct applications — check the programme page on the official site.